Caterpillar type belt joint skiving and gluing and laminating integrated machine.The tape is fed through the gluing and drying devices in a single pass. It is automatically driven and applied to the belt lap, ensuring the tape ends match the length of the joint.

Abrasive belt slitting machine

The wide sanding belt slitting machine QB-1650/1400 features the following technical specifications:

GYJ-400A

This fully automatic Abrasive Roll Slitting & Cut To Length Machine from Taino abraivses.It would finish the abrasive material slitting and length cutting at same time.The converter is designed to achieve the desired size in a single step,eliminating the need to first slit abrasive jumbo rolls into narrower rolls before processing.

Taino's fully automatic Abrasive Belt Cut to Length Machine is available in 750mm and 900mm cut lengths , which corresponds to the maximum width of the abrasive cloth of 550mm and 750mm respectively, and the length of the abrasive cloth is within the range of 0~10,000mm, and is available in straight and s-shaped cuts, with a ±67° angle for adjustment. The cutting angle is adjustable at ±67°. Adopted servo motor, PLC control, strong stability, easy to use.

The Quick Change Disc Machine by Taino exemplifies cutting-edge engineering in abrasive disc manufacturing.The Quick Change Disc Machine is a testament to Taino’s commitment to innovation, offering a flexible, efficient solution for abrasive disc production.

controlled by an independent motor), with speed that can be adjusted steplessly. Tension is smoothly controlled through automatic adjustment of the magnetic powder brake by the tension sensor. An ultrasonic electronic rectifying device is installed, and sliding components use linear bearings, which support heavy loads with high precision and operate smoothly. The tool holder moves on a linear rail, and both unwinding and rewinding use pneumatic expansion shafts.

(Uses compressed air as the power source to avoid the issues of traditional hydraulic presses such as high oil temperatures, complex structures, and slow speeds. The use of pneumatic-hydraulic cylinders overcomes the problems of small and unstable pressure often associated with pneumatic presses. Precision in pressure and timing control is achieved through PLC program-controlled synchronization of multiple cylinders.)